| TSG-2 WHOLE VACUUM TRANSFER HIGH SPPED PRINTER SLOTTER DIE CUTTER MACHINE |
|
|
|
真空传送印刷单元
◆印刷辊为优质钢，表面研磨，镀硬铬。
◆平衡校正，运转平稳。
◆卷轴挂版，采用左右两边锁紧装置，使挂版对位准确。
◆全版挂版沟，适用 10mm×3mm 挂版条。
◆装卸印刷板，脚踏开关电动控制正反转。
◆采用真空吸附输送纸板 ( 送纸轮表面为陶瓷、增加耐磨及寿命 )。不必使用拉纸环就可以使纸板通过印刷部。
◆压印辊间隙调整采用电脑及电子数字式控制，控制范围 0-12mm。
◆印刷相位调整采用伺服电机驱动。
◆印刷相位固定装置，电磁离合器制动式刹车机构。当单元分离调整相位或清洗时，刹车机构限制齿轮转动，保持原有齿轮位置固定点。
◆横向相位采用电脑控制，控制范围 ±10mm。
◆清洗印版后自动复位系统。
◆气压式单隔膜泵，供墨稳定，操作保养简单。
◆供墨异常，警示灯显示。
◆滤网过滤墨中杂质，保护网纹辊。
◆腔刮刀供墨系统下配有墨槽。
◆自动切换清洗装置，让水墨回收更彻底。
Vacuum Transfer Printing Unit
◆The printing rollers are rollers are made by high quality steel, hard chrome plating,surface grinding.
◆Balance correction make the machine running more steadily.
◆Scroll hanging the printing sheet,adopt lock device by both sides.Make the sheet in correct regestration.
◆Full sheet hanging channel,Fit for 10mm×3mm hanging bar.
◆Pedal switch control the printing roller turning forward or back off when install the printing sheet.
◆Adopts vacuum transfer(The surface of the transfer wheel is made by ceramic,in order to increase the rub and using life).Can transfer the cardboard without transfer roller.
◆The adjustment of the Printing presure rollers space adopts computure control,between 0-12mm.
◆Servo motor is adopted for phose adjustment.
◆Immobilization device of the printing phose.Electromagnetic clutch brake type brake mechanism.The Brake mechanism to limit gear rotation,Maintain the fixed position of the original gear when the units seperate or adjust the phose and cleaning.
◆Horizontal phase using computer control,±10mm.
◆Automatic reset system after cleaning plate.
◆Pneumatic single diaphragm pump,Ink supply stability,Operationand maintenance is simple.
◆Warning light displays when Ink supply anomaly .
◆The rosebox filters the impurity substance of the ink,to protect the anilox.
◆Ink tank is placed under the Single blade ink supply system.
◆Automatic switching cleaning device makes ink recycling more thorough.
|
|
|
